IMET KS 652

General

THE "ONE-LOCK" MITERING SYSTEM

The KS 652 series is engineered to eliminate the most common bottleneck in angular cutting: material repositioning.

• Single-Clamping Rotation: These are the only machines in their class where the operator can lock the material once and rotate the bow to any angle between 60° Left and 60° Right. There is no need to open the vise or shift the bar to achieve complex miter cuts.
• KS 652 NC Motorized Rotation: The NC version features a 0.55 kW motor-reducer and inverter for automatic bow positioning. A hydraulic piston and air-cleaning system ensure the bow locks into the exact set position with maximum precision.
• Transversal Vise Displacement: The vise slides transversally on linear guides, controlled by a hydraulic cylinder and encoder for perfect alignment relative to the cutting line.

Features

• 7” Touch Screen CNC (NC Model): An intuitive HMI allows the operator to set cutting angles, manage up to 99 programs, and perform self-diagnosis.
• 6° Canted Sawframe: The blade is never parallel to the material surface, ensuring it always works on a section of the material rather than a flat surface. This reduces stress, prevents binding, and extends blade life.
• High-Tension Cutting: Standard tension is 28,446 PSI (2000 kg/cm²), increasing to 31,291 PSI (2200 kg/cm²)when equipped with the optional 41mm blade.
• Material Detection Device: A mechanical feeler allows for rapid blade approach by automatically detecting the material height, transitioning immediately to the set feed rate upon contact.
• Precision Angle Referencing: Both machines feature a graduated scale on the rotating work surface with automatic stops at 0°, 45°, and 60°.
• Mobile Control Console: Independent from the machine frame to ensure operator safety and ergonomics, featuring LEDs for blade tension, guard status, and thermal blocks.

Technical Data

• Max Round Cutting Capacity (0°): 20.07 in (510 mm)
• Max Square Cutting Capacity (0°): 18.89 in (480 mm)
• Max Rectangular Cutting Capacity (0°): 25.59 in x 17.71 in (650 x 450 mm)
• Miter Capacity (45° L): Round: 17.32 in (440 mm) / Square: 16.92 in (430 mm)
• Miter Capacity (45° R): Round: 17.32 in (440 mm) / Square: 17.32 in (440 mm)
• Miter Capacity (60° L/R): Round: 9.84 in (250 mm) / Rectangular: 9.84 in x 17.71 in (250 x 450 mm)
• Solid Material (C45): 11.02 in (280 mm) / Up to 13.77 in (350 mm) with HP Pack
• Blade Dimensions: 209.44 in x 1.33 in x 0.043 in (5320 x 34 x 1.1 mm)
• Blade Speed: 49 – 328 ft/min (15 – 100 m/min)
• Blade Motor Power: 4.02 HP (3 kW) / Optional 5.36 HP (4 kW)
• Machine Weight: 4,629 lbs (2100 kg)
• Dimensions: 74.60 in x 112.99 in x 90.55 in (1895 x 2870 x 2300 mm)

Standard Equipment

• Bimetal bandsaw blade.
• Motorized nylon blade cleaning brush.
• Transversal sliding hydraulic vise with pressure regulator.
• Independent mobile control console.
• Removable chips collection tank.
• Automatic stop system for blade breakage or tension failure.

Optionals

• High Performance Pack: Upgrades the machine with a 5.36 HP (4 kW) motor, 1.61 in (41 mm) blade height, and hydraulic tensioning for cutting large solids up to 350 mm.
• Hydraulic Bundle Cutting Device: Specialized clamping for packs of tubes (Max 650 x 450 mm). Note: Limits cutting to 0° only.
• Angle Display (Standard on NC): LCD display for the semiautomatic version to show precise cutting angles.
• Minimal Lubrication System: Air-oil micro-mist system with a 0.34 gal (1.3 L) tank.
• Laser Ray: Projection of the cutting line directly onto the workpiece.