IMET BS 350

General

VERSIONS AVAILABLE

• PLUS (Double Miter): Upgrades the machine with a rotating worktable for Double-Miter capability, allowing angle cuts up to 45° Right and 60° Left. Standard versions without "PLUS" are limited to Single-Miter (60° Left).
• GH (Autocut): Adds a Gravity Hydraulic system with a 3-way selector (Manual, Rapid Approach, or Autocut). In Autocut mode, the saw executes the cut autonomously with a hydraulically regulated feed rate and stops automatically at the end of the stroke.
• SHI (Semi-Automatic): Features a full Semi-Automatic Hydraulic cycle. This version uses an integrated hydraulic unit to actuate the material clamping, control the blade descent, and automatically lift the saw head back to the starting position.

Features

• Reinforced Structure: Features a heavy-duty steel saw frame with a closed tubular section and large 11.81 in (300 mm)pulleys to reduce blade stress and prevent vibration during heavy cuts.
• Ultra-High Blade Tension: Maintains a superior tension of 28,445 PSI (2000 kgf/cm2), ensuring maximum precision and straightness when cutting large solids or bundles.
• Rotating Worktable: Equipped with a wide 18.11 in (460 mm) diameter rotating table integral with the saw frame, preventing incision damage to the table surface during angle changes.
• Precision Guidance: High-precision blade guides utilize carbide inserts and additional side bearings for perfect blade alignment.
• Vise Clamping: Features a manual quick-clamping vise (GH/Manual) or a hydraulically actuated vise (SHI) on adjustable guides with rapid transverse sliding.
• Blade Maintenance: Includes a motorized blade cleaning brush with nylon inserts as standard equipment to keep the blade clear of chips.

Technical Data

• Max Round Cutting Capacity (90°): 12.01 in (305 mm)
• Max Square Cutting Capacity (90°): 10.24 in (260 mm)
• Max Rectangular Cutting Capacity (90°): 13.78 in ×7.87 in (350×200 mm)
• Solid Bar Capacity (90°, C45 Steel): 7.87 in (200 mm)
• Max Miter Left: 60°
• Max Miter Right (PLUS models): 45°
• Blade Dimensions: 132.68 in ×1.06 in ×0.035 in (3370×27×0.9 mm)
• Blade Motor Power: 2.0 HP /3.0 HP (1.5 kW /2.2 kW)
• Blade Speed: Two Speeds: 121/243 ft/min (37/74 m/min)
• Working Table Height: 37.01 in (940 mm)
• Machine Weight (GH Version): 1336 lbs (606 kg)

Standard Equipment

• Bimetal bandsaw blade (installed).
• Motorized blade cleaning brush.
• Integrated flood coolant system with electric pump.
• Adjustable material length stop rod.
• Amp meter for monitoring motor current.

Optionals

• Electronic Speed Inverter (VFD): Variable blade speed control from 59 to 328 ft/min (18−100 m/min).
• Roller tables (gravity, digital RTD, or motorized NC RTP measuring systems).
• Pneumatic vise for rapid manual clamping (Manual/GH models).
• Hydraulic devise for bundle cutting.
• Laser ray guide for visual cutting line alignment.
• Vertical containment rollers.