IMET BS 400

General

VERSIONS AVAILABLE

• PLUS (Double Miter): Upgrades the model with a rotating worktable for Double-Miter capability, allowing angle cuts up to 45° Right and 60° Left. Standard versions are limited to Single-Miter (60° Left).
• GH (Autocut): Adds a Gravity Hydraulic system with a 3-way selector. In Autocut mode, the blade descent rate is regulated by a hydraulic brake for autonomous cutting with an automatic shut-off.
• SHI (Semi-Automatic): Features a full Semi-Automatic Hydraulic cycle. This version utilizes an integrated hydraulic power unit to actuate the material clamping, control the blade feed, and automatically lift the saw headto the start position after the cut.

Features

• Enhanced Beam Strength: Uses a larger 1.34 in ×0.043 in (34 mm×1.1 mm) blade, providing increased rigidity and straighter cuts on heavy rectangular profiles.
• Structural Rigidity: Built with a heavy cast-iron saw frame and a large 14.57 in (370 mm) diameter rotating work surface designed to support heavy workpieces.
• High Blade Tension: Maintains an exceptional tension of 27,020 PSI (1900 kg/cm2), featuring manual front adjustment and an integrated safety micro-switch.
• Vice Clamping: Features a manual quick-clamping vice (GH/Manual) or a hydraulically actuated vice (SHI) on adjustable guides with rapid transverse sliding.
• Precision Guides: High-precision blade guides utilize carbide pads and additional bearings for perfect blade alignment and extended tool life.
• Blade Maintenance: Includes a motorized blade cleaning brush with nylon inserts as standard equipment to actively remove chips during operation.

Technical Data

• Max Round Cutting Capacity (90°): 12.2 in (310 mm)
• Max Square Cutting Capacity (90°): 11.02 in (280 mm)
• Max Rectangular Cutting Capacity (90°): 15.75 in ×9.84 in (400×250 mm)
• Solid Bar Capacity (90°, C45 Steel): 9.84 in (250 mm)
• Max Miter Left: 60°
• Max Miter Right (PLUS models): 45°
• Blade Dimensions: 158.35 in ×1.34 in ×0.043 in (4020×34×1.1 mm)
• Blade Motor Power: 2.0 HP /3.0 HP (1.5 kW /2.2 kW)
• Blade Speed: Two Speeds: 121/243 ft/min (37/74 m/min)
• Working Table Height: 37.01 in (940 mm)
• Machine Weight (GH Version): 1404 lbs (637 kg)

Standard Equipment

• Bimetal bandsaw blade (installed).
• Motorized blade cleaning brush.
• Integrated flood coolant system with electric pump.
• Adjustable material length stop rod.
• Amp meter to monitor motor consumption.

Optionals

• Electronic Speed Inverter (VFD): Variable blade speed control from 59 to 328 ft/min (18−100 m/min).
• Roller tables (gravity, digital RTD, or motorized NC RTP measuring systems).
• Pneumatic vise for rapid manual clamping (Manual/GH models).
• Laser ray guide for visual cutting line alignment.
• Hydraulic device for bundle cutting.
• Vertical containment rollers.