Automatic industrial notching saw to cut end notches on aluminum profiles for curtain walls and other architectural applications. Equipped with two saw blades (horizontal and vertical) both adjustable in different angles. Work piece is placed up against adjustable angle back fence, fixed on the work table by horizontal and vertical clamps. The workpiece remains stationary during the notching process while the saw carriage travels horizontally towards the workpiece to execute an accurate cut. Besides the rectangular notches, it has the capability of wide range of compound angle end cuts (variable angle notches) by adjusting back fence angle, horizontal and vertical blade angles for mullion and transom combinations for complex curtain walls, winter garden, sky lights and special designs.

Product PDF

  • Semi-automatic, precise and safe notching operation
  • Hydro-pneumatic variable speed blade feed
  • Capability of wide range compound angle cuts
  • Manual adjustment of saw blade height, positioning via mechanical display, optional electronic display
  • Profile depth stop is adjustable by means of a hand wheel and linear guides. Adjustment is referred to a mechanical position indicator.
  • Semi-automatic precise and safe notching due to the profile being fixed on the table during the cut

  • 2 x 3 kW Motors, 400V, 50/60Hz , 3 phase
  • 600V to 400V transformer is included
  • Max. profile dimensions that can be processed: 280 x 300 (HxW)
  • Notching capacity (blades at 90°) : horizontal up to 185 mm, vertical up to 210 mm
  • Manual adjustment of horizontal saw blade in/out max. 20mm to the front to cut slots
  • Vertical blade tilt range: 30°-90°-30° (30° either directions), referred to a mechanical display
  • Horizontal blade tilt range: 30°-90°-30° (30° either directions), referred to a mechanical display
  • Pivoting range of material back-fence: 30°-90°-30° (30° either directions), by referring to a scale

  • 1 Horizontal saw blade Ø 500mm (19.7")
  • 1 Vertical saw blade Ø 550mm (21.6")
  • 3 digital display sets for positioning of horizontal and vertical cutting unit
  • Length stop with manual adjustment on mechanical scale
  • Pneumatic horizontal clamp
  • Pneumatic vertical clamp
  • Spray mist coolant system with 2 nozzles
  • Fully covered sawing unit and 2-hand control unit ensure a safe operation

  • Spare Ø 500mm (19.7") saw blade
  • Spare Ø 550mm (21.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • Roller conveyor to support long profiles