MECAL TDC 622 EDGEMASTER Double Head Compound Miter Saw

This model is an up-stroke double head compound miter saw with powered movement of the right head by means of a DC servomotor. The left hand side unit is stationary. 

Machine carries ∅ 600mm (23.6″) saw blade.

Compound blade feed motion for increased cutting capacity. Linear radial motion addition to pivoting motion of the saw allows this machine to achieve a very large compound cut capability.

Cutting units are electronically tilted within 45° and 90° and electronically rotated within 157.5° and 45°.

5 CNC axes driven by brushless DC servomotors including: positioning of mobile head, tilt and rotation of both heads. 

Two hand controlled sawing process and automatically operated safety guards ensure operator safety.

Cutting modes are: single cut, automatic cutting list processing, over-size and under-size cutting cycles.

Cutting lists can be entered on the machine pc, can be imported through a USB key or network.

Machine has a 5m useful cutting length at single stroke and a max length of 10m with double stroke.

  • Tilting of the cutting groups up to 45° towards inside variably
  • Rotation of cutting units toward outside up to 160° and toward inside up to 45° variably
  • Standard cutting cycle with only pivoting motion of the cutting units
  • Dynamic cutting cycle with the compound motion of the cutting units. This case, pivoting motion is combined with linear forward and backwards motion of blade to increase cutting capacity
  • Hydro-pneumatic blade feed for both pivoting and linear movements
  • Dynamic protection guards for a complete coverage of the cutting area
  • Dynamic profile back support automatically adjusts according to the cutting angle in order to achieve best possible material backing.
  • Clamping system of the profile is linked to the angular positions of the cutting units so that the optimum clamping position is automatically set as the blades are adjusted
  • Minimal Quantity Lubrication system (MQL) for blade lubrication
  • Pre-arranged to connect a suction unit for chips and fumes
  • Equipped with a motorized belt conveyor for chips and waste evacuation

  • Tilting of the cutting groups up to 45° towards inside variably
  • Rotation of cutting units toward outside up to 157.5° and toward inside up to 45° variably
  • 2 x 5kW, 400V, 50-60 Hz, 3 Phase Motors
  • Mobile roller conveyor (3m)
  • 2 x TCT saw blade Ø 600mm (23.6")
  • Blade speed: 2800 RPM
  • Minimum cutting length at 90°: 390mm (15.35")
  • Maximum cutting length (single stroke): 5000mm (16.4')
  • Operating air pressure: 7 Bar (101 psi)

  • Industrial computer MS Windows compatible (Schneider Electric)
  • Mobile roller conveyor (3m) 
  • 2 x TCT saw blade Ø 600mm (23.6")
  • 2 pairs of vertical pneumatic clamps
  • PVCbelt conveyor for chips and scrap pieces 
  • Compressed air treatment group (Air filter/Lubricator/Regulator)

  • Spare Ø 600mm (23.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • Automatic intermediate support
  • Barcode printer
  • Barcode scanner
  • Industrial dust collector

 

Mecal TDC 622 Edgemaster compound double miter saw cutting diagram