YILMAZ ACK 550 UP-CUT MITER SAW

The Yilmaz “ACK 550” up-cut miter saw is designed for straight and miter cuts of large PVC and aluminum profiles. The blade is raised up by means of an hydro-pneumatic cylinder. The operator holds the two push buttons to raise the blade up until the cut is completed. As soon as one or both buttons are released, the blade descends below the table level. The table cutting line can be manually rotated in both directions to cut mitre angles down to 15°. Extended infeed and outfeed covers and two interlock safety switches are part of the standard safety features. Thanks to the cutting capacity it has, “ACK 550” is ideal machine for curtain walls and commercial aluminum applications as well as industrial extrusions.

 

  • Hydro-pneumatic blade feed
  • Infinetly adjustable saw blade feed speed
  • Two-hand controlled safe operation
  • Location points at 75°,60°,45°,30°,22.5°,15°, 0° both on the left and on the right
  • Rotation range from -75° left to +75° right, infinitely adjustable
  • Pneumatically operated protection hood
  • Interior LED lighting for increased visibility
  • Top and bottom dust and chips suction ports
  • Blade compartment is easily accessible from the front and the back of the saw

  • Motor: 4kW (5.4HP), 230V, 60Hz
  • Blade speed: 2400RPM
  • Blade diameter: 550mm (21.6")
  • Blade hub diameter: 30mm (1.18")
  • Operating air pressure: 6-8 Bar (87-116 psi)
  • Air consumption: 50 litres/min (13.2 gal/min)

  • 1 x Saw blade Ø 550mm (21.6")
  • 2 x Pneumatic vertical clamps
  • 1 x Pneumatic horizontal clamps
  • 1 x Spray mist blade lubrication system
  • 1 x Air blower gun
  • Extended infeed and outfeed covers

  • Spare Ø 550mm (21.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • MKN 300 roller conveyor - 3m (10')
  • Single phase motor

Yilmaz ACK 550 aluminum upcut saw cutting diagram