MECAL TDC 622 DYNACUT

General

The Mecal TDC 622 Dynacut is an up-cut double miter saw designed for industrial and architectural applications like curtain walls that require wide, precise cuts in aluminum extrusions. The machine is available in 5-meter and 6-meter useful cutting lengths and includes a special function to process oversize lengths up to approximately twice the machine's stated capacity. The left cutting unit is stationary, while the right head is motorized for accurate positioning.

Cutting Heads

The Dynacut is equipped with two large 600 mm (23.6") TCT saw blades. The cutting heads are CNC controlled and can independently tilt inward, from 90° to 45°. Its exceptional cutting capacity is achieved through a dynamic cutting cycle that combines the standard pivoting up-stroke with a linear forward-and-back blade movement. This compound motion allows the Dynacut to make exceptionally wide cuts that are not possible with a standard pivoting saw.

Positioning and Clamping

To ensure a perfect cut, a dynamic profile back support system automatically adjusts its position according to the cutting angle for the best possible material backing. The clamping system is also linked to the angular position of the heads, automatically setting the optimal clamping position as the blades are adjusted. The machine comes standard with two vertical pneumatic clamps per head for secure material holding.

Operation and Programming

The machine is controlled via a 15" industrial touchscreen PC with a Windows based interface. Cutting lists can be entered directly at the machine or imported via USB or a network connection. For operator safety, the cutting cycle is activated with a two-hand control system, and dynamic protection guards completely cover the cutting area during operation.

Features

• Servo-controlled tilting of the cutting units from 90° to 45° inward.
• Dynamic cutting cycle combines pivoting and linear blade feed for the widest possible cut.
• Dynamic profile back support automatically adjusts to the cutting angle for optimal material backing.
• Clamping system automatically sets the optimum position linked to the angular adjustments of the cutting heads.
• Multiple cutting modes: single cut, automatic cutting list processing, oversize and undersize cycles.
• Minimal Quantity Lubrication (MQL) for clean and efficient blade cooling.
• Pre-arranged for connection to a dust collector.

Technical Data

• Tilting Range: Variable, from 90° to 45° towards the inside.
• Saw Blade Diameter: 2 x 600 mm (23.6”).
• Motor Power: 2 x 5 kW.
• Blade Speed: 2800 RPM.
• Available Max Cutting Lengths (simultaneous double head cut):

• • 5,000 mm (16.4 ft)
  • 6,000 mm (20 ft).
  • 7,400 mm (24 ft)

• Minimum Cutting Length at 90°: 470 mm (18.5”).
• Operating Air Pressure: 7 Bar (100 psi).

Standard Equipment

• Industrial PC with MS Windows based interface.
• 2 x TCT saw blades Ø 600mm.
• 2 pairs of vertical pneumatic clamps.
• Mobile roller conveyor for profile support (3m / 10ft).
• 1 x Intermediate profile support.
• Minimal Quantity Lubrication (MQL) system.
• Compressed air treatment group (filter/regulator/lubricator).

Optionals

• Spare 600 mm (23.6") TCT saw blade
• Additional intermediate profile support
• Barcode scanner
• Barcode printer
• Industrial chip collector
• Cutting fluid (20-litre pail)
• Profile lifting device
• Remote operator panel
• Fence and light barrier kit
• Automatic chip collector starter kit
• Motorized PVC belt conveyor for chips and scrap pieces.

Cutting diagram