Yilmaz “MK 420 PS” manual up-cut saw machine is designed for 90° and mitre cutting of PVC, aluminum extrusions and wood profiles. The machine can work in two different modes: lengthwise cutting like a table saw and cross cutting like a cut-off saw. This feature along with adjustable blade stroke enable it to be used for notches as well. Blade is raised up manually by the operator. The “MK 420 PS” has a 360° rotating platform and can be turned depending how need to be used.

  • Manual up-cut saw
  • Adjustable back fence to allow the most effective use of the saw blade capacity for wide and flat profiles
  • Pre-set location points at 30°, 45°, 60°, 67,5°, 75°, 90° (both left and right)
  • Wide angle cutting range up to 30° to the right and 30° to the left
  • Adjustable machine working direction by means of rotary (360°) platform via foot pedal
  • Easy saw blade change
  • Ability of cross and longitudinal cutting operations
  • Protection hood for cross-cut operations
  • Blade protection cover for lengthwise cutting operations (table saw mode)

  • Motor: 2.2kW (3HP), 230V, 60Hz
  • Blade speed: 3000 RPM
  • Blade diameter: 420mm (16½")
  • Blade hub diameter: 30mm (1.18")

  • 1 x Saw blade Ø 420mm (16½")
  • 2 x Manual vertical clamps
  • 1 x Spray mist blade lubrication system
  • Back fence
  • Profile length stop
  • Safety guard for lengthwise cutting operations
  • Safety hood for cross cutting

  • Spare Ø 420mm (16½") saw blade
  • kit for pneumatic clamps
  • 20 litres (5.3 gal) pail of cutting fluid
  • MKN 300 roller conveyor - 3m (10')

Yilmaz MK 420 manual upcut saw cutting diagram