YILMAZ FR 225 S Copy Router

Vertical spindle copy router with 1:1 transfer ratio from template to the workpiece. Machine is operated manually by means of two handles: one for plunging in, the other for routing on two axes. It has a 3 phase motor and transmission to increase spindle speed to 14000 RPM. A triple drill spindle is positioned on the back side of the working area and is activated by the operator by pulling manually a lever. The triple spindle allow to drill simultaneously the 3 holes required for the “tilt and turn” windows handle. A spray mist tool cooling system allows machining up to 3mm thin walled (0.12″) aluminum profiles. Machine is typically used to make hardware cut-outs, water slots and holes on aluminum or PVC window and door profiles.

  • Cast aluminum main structure
  • Corrosion resistant linear guides
  • Robust machine stand with integrated cabinet
  • Electroplated copy template
  • Two pieces tracer pins
  • Slots can be machined without using the copy template by setting mechanical stops
  • side shafts with reference stops
  • hand lever for the manual triple drilling operation (Tilt & Turn windows)

  • vertical spindle 0.55 kW (0.75 HP), 230V, 3~, 60 Hz
  • triple drill motor: 0.75kW (1HP), 900 RPM
  • Spindle speed: 14000RPM
  • Max machining (X,Y,Z): 270x110x130 mm (11.4"x4.3"x5.1")
  • Min profile height: 30mm (1.18")
  • Template Size 500mm x 150mm (19.7" x 5.9")
  • Clamping capacity: 150 mm (6”)
  • Aluminium profiles with wall thickness up to 3mm (0.12") can be machined in 1:1 ratio
  • Air consumption: 5 lt./min (1.1 gal/min)
  • Air supply pressure: 6-8 bar (87-116 psi)

  • 1 x Standard template
  • 1 Ø5mm (0.197”), L: 80mm (3.15”) router bit
  • 1 x 8mm collet
  • 1 x Air blower gun
  • 2 x Profile length stops
  • 1 Spray mist tool lubrication system
  • 2 horizontal pneumatic clamps
  • 1 triple drill spindle

  • 20 litres (5.3 gal) pail of cutting fluid
  • MKN 300 roller conveyor - 3m (10')
  • Additional router bits
  • MA 240 centring device