PRESSTA EISELE SW 600

Pressta-Eisele SW 600 is a fully automatic high performance cutting centre designed for cutting aluminum or other non-ferrous extruded material at any angle within 22.5° and 157.5°. It is composed of an infeed magazine with servo pusher powered by a magnetic motor, miter cutting station, an outfeed magazine with various material discharge/sorting system options. The machine uses 600mm saw blade and back-cut blade feed. 

Built tough to handle multi-shift production needs. The standard saw motor is 5.5KW and can be upgraded to 9.2KW, allowing quick and precise cutting even thick-walled industrial profiles. Saw feed stroke, RPM and the blade feed speed are adjustable from the operator’s control interface. 

Machine can process one profile at a time or multiple profiles in a bundle depending on the profile properties. Profile guides and clamping fixtures can be designed as per given drawings upon request. 

The trim-cut and off-cut are automatically be ejected into a separate collection box with the help of a waste conveyor discharge system. 

Various optional features like milling and drilling stations, measuring and marking stations and automated part handling make this machine perfectly adaptable for demanding applications.

  • Control panel with industrial PC and 21” screen
  • Network interface: Including IXON Router - VPN connection 
  • Data transfer - optimized cutting list from Excel or CSV file 
  • Profile lifting rollers to prevent scratches when pusher is feeding the profile into the saw
  • Feeding pusher with linear motor to feed the bar into the saw 
  • Pneumatic gripper with 2 servo axis (Y and Z direction) adjusting to different profile shapes automatically
  • Radial blade feed direction (back-cut)
  • Servo controlled blade feed movement 
  • Vertical and horizontal pneumatic clamps both left and right side of the blade
  • Mist spray blade lubrication with level indicator and automatic stop, lubrication tank capacity 1 litre
  • Complete cabin enclosure for the cutting station
  • Internal lights over the saw
  • Automatic scrap gate to separate trim-cuts and off-cuts 
  • Scrap pieces will fall down through a chute onto an inclined conveyor which then are transported into a customer provided scrap box behind the sawing station (max. 1050mm box height) 
  • Customer can choose and switch between the belt to drop cut parts into a box or cross pusher to push them onto a table
  • Pneumatic stopper at end of unloading conveyor
  • Pneumatic cross pusher which moves cuts from 20 - 1500mm onto the hard-wood table in front of the belt conveyor, Short pieces can be lined up and pushed together on the table 
  • Light barrier stops cycle when table is filled up
  • Blower with 3 nozzles to remove chips from hollow profiles. This function can be switched off, depending on profile shape and length.

  • Profile stock length from 1000 - 6500mm (3.3' - 21.3')
  • Shortest cut length at 90°: 30mm (1.18")
  • Shortest cut length at 45°: 160mm 4.56")
  • Shortest cut length at 22,5°: 390mm (15.35")
  • Maximum workable profile dimension (WxH): 350x200mm (13¾"x8")
  • 10 compartments in-feed table with 6-line tooth belt , each compartment can accommodate max. 176mm (6.9") wide material
  • Max. Loading weight 75kg (165lbs) per stock length
  • Feeding pusher speed max up to 180 m/min (590 ft/min)
  • Feeding pusher positioning accuracy ±0,15mm/1000mm
  • Ø 600mm (23.6") saw blade, flange Ø 160mm (6.3"); bore Ø 40mm (1.6")
  • Motor 5,5 kW, S6 60Hz, 400V, 2800 RPM (optional upgrade to 9.2 kW)
  • Servo mitre angle adjustment range 22,5° - 157,5°
  • The unloading conveyor belt is 3000mm (10') long, 450mm (17¾") wide
  • Adjustable belt speed from 20 to 50 m/min (65.6 to 164 ft/min) through a frequency inverter
  • Suction port for chip extractor at belt end ø 100mm (4")
  • Min. trim cut can be handled :10 mm (0.4")
  • Max. size of trim cut + off-cut to be handled: 250mm (12")
  • Longer off-cuts will be cut to 250mm (12") long scrap parts
  • Unloading table depth 1600mm (63"), width 1500mm (59")

  • Safety fence to secure left/right side and behind incl. 2 maintenance access doors
  • 10 compartments in-feed table
  • Pusher with linear motor to feed the bar into the saw
  • Ø 600mm (23.6") saw blade, flange Ø 160mm (6.3"); bore Ø 40mm (1.6")
  • Vertical and horizontal pneumatic clamps both left and right side of the blade
  • Mist spray blade lubrication
  • internal lights over the saw
  • Automatic scrap gate to separate trim-cuts and off-cuts
  • Unloading conveyor belt
  • Suction port for chip extractor at belt end ø 100 mm
  • Unloading table
  • Light barrier stops cycle when table is filled up
  • Blower with 3 nozzles to remove chips from hollow profiles.

  • Spare Ø 600 (23.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • Aluminum dust & chips collector

Pressta Eisele SW600 aluminum cutting center cutting diagram