PRESSTA EISELE PROFILMA 501E

Pressta-Eisele Profilma 501 E is a fully automatic circular saw designed for 90° cutting of aluminum and other non-ferrous metal profiles. The sturdy design allow the Profilma 501 E to work round the clock 24/7 without losing precision. It has an integrated servo bar feeder with 600mm stroke that is capable to cut min. 3mm (0.12”) to max. 9900mm (32.1’) automatically with repetitive strokes long pieces. Carries a 500mm diameter saw blade. Table separation feature prevents back-cutting, ensures highest cut quality and extends blade life. Saw blade feed is performed by an hydro-pneumatic actuator. Saw blade feed speed and stroke is adjustable variably. When the material finished, machine stops automatically. This saw is ideal for any operation that is looking at consistency over the years. It is the ideal solution for automotive components and other products that require tight tolerances and statistic control after cutting.

  • Fully automatic cutting and guiding profiles as per given drawings (exact dwg/dxf files required)
  • Hydro-pneumatic blade feed with infinitely adjustable feed speed
  • Linear motion system consisting of precision round guides and ball screw.
  • Vertical and horizontal pneumatic clamps both on the left and right side of the blade
  • Adjustable horizontal and vertical clamping pressure
  • Piece count indication with bundle multiplier and cycle time indication on the control display
  • Automatic stopping function when the profile finished
  • Cycle spray mist device, oil tank 1 Litre capacity with automatic stop if fluid ends
  • Part evacuation slide at the out-feed side of the machine, 200mm (7.9") long
  • Noise reduction provided by noise absorbing mats mounted inside the machine
  • All necessary fixtures, profile guides and inserts are designed and manufactured by Pressta-Eisele for the entire range of profiles of customer to be ran on this machine
  • Fully enclosed operation with tunnel in-feed guard

  • Motor: 7,5 kW, S6, 400V, 50Hz, 2850 RPM
  • A transformer for 600V Canadian power is supplied with the machine
  • Ø 550mm (21.6") saw blade, up stroke cutting direction
  • Max cutting size (WxH): 270x140mm (10.6" x 5½") - ∅ 185mm (7.3")
  • Servo material feeder with 600mm (23.6") stroke, equipped with horizontal and vertical pneumatic clamps.
  • Max. cutting length up to 9.9m (32½') using repetitive strokes
  • Remaining piece length down to 75mm (3") depending on the profile
  • 2 x Ø100mm (4") suction port to connect chip extractor

  • Ø 550mm (21.6") saw blade
  • Vertical and horizontal pneumatic clamps both on the left and right side of the blade
  • 2 x Ø100mm suction port to connect chip extractor
  • Cycle spray mist device
  • Fully enclosed operation with tunnel in-feed safety guard

  • Spare Ø 550mm (21.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • Aluminum dust & chips collector
  • Idle roller conveyors