We will get back to you shortly
Automatic Extrusion Saw | PRESSTA-EISELE PROFILMA 250
Pressta-Eisele Profilma 250 is a fully automatic thin blade saw designed for 90° cutting of aluminum and other non-ferrous metal profiles. The high-performance automatic saw Profilma 250 has been designed to cut aluminum and non-ferrous metals to the desired length using a particularly thin saw blade. Depending on the version, solid carbide circular saw blades Ø 250 mm with 1.6 mm width or Ø 200 mm with 1.2 mm width can be used on this machine. Compared to the conventional carbide-tipped circular saw blades, up to 2.5 mm can be saved per cut.It has an integrated servo bar feeder with 650mm (25.6″) stroke that is capable to cut min. 2mm (0.08”) to max. 3250mm (128’) with repetitive strokes. Saw blade feed is performed by an hydro-pneumatic actuator. Saw blade feed speed and stroke are adjustable variably. When the material finished, machine stops automatically. This saw is ideal for any operation that is looking at consistency over the years.
Product PDF
Features
Technical Data
Standard Equipment
Optionals
Cutting Diagram
Video
- High-Performance automatic circular saw for aluminium and non-ferrous metal
- Hydro-pneumatic blade feed with infinitely adjustable feed speed
- Vertical motion of the saw blade
- Material feed with servo motor, precision round guides and ball screw
- 2-axis NC control Simatic S7-300 with 7" touch screen
- Max cutting size (HxW): 60 x 140mm (2.36"x5½")
- Manual opening/closing of the safety cover
- Chute at the exit of the saw to collect the cut parts
- Independent 4 clamping pressure reducers
- End piece 55mm (2.16"), depending on profile shape
- Automatic removal of first piece and remaining scrap
- Automatic stopping function when the profile finished
- Cycle spray mist device, oil tank 1 Litre capacity with automatic stop if fluid ends
- All necessary fixtures, profile guides and inserts are designed and manufactured by Pressta-Eisele for the entire range of profiles of customer to be ran on this machine
- Motor 7,5KW, 400 V, 50 Hz, infinitely adjustable
- Transformer to run at 600V included in the supply
- Use of TCT or solid carbide blades ø 200 - 250mm (7.8"-9.8")
- Max cutting size (HxW): 60 x 140mm (2.36"x5½")
- Material feed stroke from 2 to 650mm (0.08" to 25.6")
- Max. cutting length up to 3250mm (128") using repetitive strokes
- End piece 55mm (2.16"), depending on profile shape
- TCT or solid carbide blades ø 200 - 250mm (7.8"-9.8")
- Pneumatic clamping both on the left and right side of the blade
- 2 x Ø100mm suction port to connect chip extractor
- Cycle spray mist device, oil tank 1 Litre capacity with automatic stop if fluid ends
- Spare Ø 200 - 250mm (7.8"-9.8") saw blades
- 20 litres (5.3 gal) pail of cutting fluid
- Aluminum dust & chips collector
Related products
