We will get back to you shortly
Notching Saw | YILMAZ SNM 560
Automatic industrial variable angle notching saw for cutting end notches on aluminum profiles.
Equipped with two saw blades (horizontal and vertical) both adjustable in wide range angles. Work piece is placed up against an adjustable angle back fence, fixed on the work table by horizontal and vertical clamps. The workpiece remains stationary during the notching process while the saw carriage travels horizontally towards the workpiece to execute an accurate cut.
Besides the rectangular notches, the “SNM 560” has the capability of wide range of compound angle end cuts (variable angle notches) by adjusting back fence angle, horizontal and vertical blade angles for mullion and transom combinations for complex curtain walls, winter garden, sky lights and special designs.
The adjustment of the notching height is done by lowering manually the profile support table.
The precise adjustment of the cutting angles are performed manually or with an hand wheel. The indication of the blades angles as well the profile back fence are shown on LCD screens.
Features
Tecnical Data
Standard Equipment
Optionals
Video
- Automatic, precise and safe notching operation
- Notch variation: rectangular, one plane miter, two plane miter and three plane miter
- LCD screens to show all cutting angles
- Cast iron machine frame for the best stability and performance during the cutting operation
- Hand wheel adjustment for the profile depth stop
- Spray mist cooling system
- Two hand safety control
- Interior LED light
- 1.5 + 1.5 kW Motors, 400V, 50/60Hz , 3 phase (transformer 600V to 400V not included)
- Blades RPM: 2500
- Max. profile dimensions that can be processed: mm 260x140 (HxW)
- Blades feed speed range: 1 to 4 m/min (3.2 to 13 ft/min)
- Notching capacity (blades at 90°) : horizontal up to 185 mm, vertical up to 210 mm
- Hydro-pneumatic variable speed blade feed with 900mm stroke, potentiometer and linear guides
- Manual adjustment of notch height: 0-210mm.
- Manual adjustment of vertical blade tilt: +45°/ -45° (front/back)
- Manual adjustment of horizontal blade tilt: +60° / -60°
- Manual pivoting range of material back-fence: +60° / -60°
- 1 Horizontal saw blade Ø 500mm (19.7")
- 1 Vertical saw blade Ø 550mm (21.6")
- 2 pneumatic horizontal clamp
- 2 pneumatic vertical clamps
- LCD screens to show all cutting angles
- Hand wheel adjustment for the profile depth stop
- Spray mist coolant system
- Fully covered sawing unit and 2-hand control unit ensure a safe operation
- Spare Ø 500mm (19.7") saw blade
- Spare Ø 550mm (21.6") saw blade
- 20 litres (5.3 gal) pail of cutting fluid
- Roller conveyor to support long profiles
- 4 axis NC control interface: servo adjustable notch height, swivel vertical blade, swivel horizontal blade, material stop fence for notching depth adjustment
Related products
