MECAL TDC 622 DYNACUT Double Miter Saw – Upcut

This model is an up-stroke double head miter saw with powered movement of the right head by means of a DC servomotor. The left hand side unit is stationary. 

Machine carries a ∅ 600mm (23.6″) saw blade.

Compound blade feed motion provides increased cutting capacity. Linear forth-back motion addition to upwards pivoting motion of the saw blade, allows this machine to achieve a very large cutting capacity. When there is no need, linear motion can be disabled and machine works only with uprising stroke. 

Cutting units are electronically tilted at any angle within 45° and 90°. 

3 CNC axes driven by brushless DC servomotors: positioning of mobile unit, tilting fixed unit blade and tilting mobile unit blade. 

Two hand controlled sawing process and automatically operated protection guards ensure operator safety.

Cutting modes are: single cut, automatic cutting list processing, over-size and under-size cutting cycles.

Cutting lists can be entered on the machine PC, can be imported through a USB key or network.

Machine has a 5m useful cutting length at single stroke and a max length of 10m with double stroke.

  • Servo tilting of the cutting units up to 45° towards inside variably
  • Standard cutting cycle with only pivoting motion of the saw blades
  • Dynamic cutting cycle with the compound motion of the saw blades. This case, pivoting motion is combined with linear advance and retract motion of blade to increase cutting capacity
  • Hydro‐pneumatic blade feed for both pivoting and linear movements
  • Dynamic protection guards for a complete coverage of the cutting area 
  • Dynamic profile back support automatically adjusts according to the cutting angle in order to achieve best possible material backing.
  • Clamping system of the profile is linked to the angular positions of the cutting units so that the optimum clamping position is automatically set as the blades are adjusted
  • Minimal Quantity Lubrication system (MQL) for blade lubrication
  • Pre‐arranged to connect a suction unit for chips and fumes

  • Servo tilting of the cutting units up to 45° towards inside variably
  • 2 x 5kW, 400V, 50-60 Hz, 3 Phase Motors
  • Mobile roller conveyor (3m)
  • 2 x TCT saw blade Ø 600mm (23.6")
  • Blade speed: 2800 RPM
  • Minimum cutting length at 90°: 390mm (15.35")
  • Maximum cutting length (single stroke): 5000mm (16.4')
  • Operating air pressure: 7 Bar (101 psi)

  • Industrial computer 15"
  • Mobile roller conveyor 3000mm (10")
  • 2 x TCT saw blade Ø 600mm (23.6")
  • 2 pairs of vertical pneumatic clamps
  • 2 pairs of horizontal pneumatic clamps
  • Compressed air treatment group (Air filter/Lubricator/Regulator)

  • Spare Ø 600mm (23.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • Automatic intermediate support
  • Barcode printer
  • Barcode scanner
  • Industrial dust collector

Mecal TDC 622 Dynacut double miter saw cutting diagram