MECAL SW 553 REVERSE GARDA Double Miter Saw

Double head mitre saw with automatic positioning of the right cutting head by means of a DC servomotor. The left unit is stationary. Cutting units tilt pneumatically and a mechanical stop can be adjusted at any angle between 22.5° and 135°. Equipped with horizontal and vertical pneumatic clamps to hold the work-piece, safety guards and spray mist tool lubrication. Equipped with ∅ 550mm (21.6″) saw blades.

Available single stroke cutting lengths: 5000mm (16.4′), 6000mm (20′)

Max cutting lengths with repeated strokes:  10m (32.8′), 12m (40′)

Machine is equipped with an industrial PC with Windows XP Embedded OS and 10.4” touch screen

The PC controls the following functions:

  • Automatic, single and special cutting cycles (arrow and chamfer)
  • Store profile codes, shapes and dimensions
  • Cut list optimization
  • Calibration cycle
  • Oversize and undersize cuts
  • Cutting list entry via keyboard or import via USB memory stick
  • Label printer

  • Large cutting capacity with Ø 550mm (21.6") saw blade
  • Electro-welded steel base is engineered for maximum rigidity and precision
  • The mobile carriage moves automatically along the machine’s longitudinal axis.
  • Cutting units tilt pneumatically and a mechanical stop can be adjusted at any angle between 22.5° and 135°
  • The blade moves out towards the front on a straight path, driven by a hydro-pneumatic (oleo-pneumatic) actuator
  • Blades feed speed can be adjusted infinitely.
  • Dynamic protection guards for optimum coverage of the cutting area
  • Software function for oversize and undersize cuts beyond the limits of the machine stroke (min & max)
  • Automatic bar feeding function
  • Pre-arranged for chips extraction unit
  • Pre-arranged for chips collector drawers
  • Pre-arranged for motorized chip conveyor
  • Spray mist tool coolant system (Venturi type)

  • Large cutting capacity with Ø 550mm (21.6") saw blade
  • Blade speed: 2800 RPM
  • Cutting units tilt pneumatically and a mechanical stop can be adjusted at any angle between 22.5° and 135°
  • Available single stroke cutting lengths: 5000mm (16.4'), 6000mm (20')
  • Max cutting lengths with repeated strokes:  10m (32.8'), 12m (40')
  • Maximum longitudinal positioning speed is 25 m/min (82'/min)
  • The system guarantees a positioning accuracy of ± 0.1mm (±0.004")
  • 2 x 2.2 kW, 400V, 50/60Hz, 3 Phase Motor
  • Min cutting length with both heads at 90°: 330mm (13")

  • 2 x TCT Saw blades Ø 550mm (21.6")
  • Cutting depth limiting device
  • Profile height detection device
  • Intermediate support for long extrusions
  • Prepared for the addition of a bar code printer
  • A Pair of horizontal pneumatic clamps
  • A Pair of vertical pneumatic clamps
  • Mobile roller conveyor with pneumatic clamp for work piece support

  • Spare Ø 550mm (21.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • Set of drawers to collect chips and scrap pieces
  • Motorized chip and scrap pieces conveyor
  • Additional horizontal clamps
  • Industrial dust collector
  • Label printer
  • MQL tool cooling system
  • Bar code reader

Mecal SW 553 Garda double miter saw cutting diagram