MECAL SW 550 PLUS

The Mecal “SW 550 Plus” is a back cut saw to cut  straight and miter PVC and aluminum profiles. The blade is activated by means of an hydro-pneumatic cylinder. The operator holds the two push buttons until the cut is completed. As soon as one or both buttons are released, the blade retract in its own casing.

  • Hydro-pneumatic blade feed
  • Large cutting capacity with 550mm (21.6") saw blade
  • Capable to perform cuts at 22,5°, 45°, 90°, 135° and 157,5°
  • Intermediate angles can be set by means of mechanical stops
  • Fully isolating guard for noise reduction and operation safety
  • Adjustable blade stroke and feed speed
  • All scraps and chips fall in the middle of the base
  • Two-hand controlled safe operation

  • Motor: 2.2kW (3HP), 230V, 60Hz
  • Blade speed: 2800RPM
  • Blade diameter: 550mm (21.6")
  • Blade hub diameter: 30mm (1.18")
  • Machine weight: 760 Kg (1675 lbs)

  • 1 x Saw blade Ø 550mm (21.6")
  • 2 x Pneumatic horizontal clamps
  • 1 x Spray mist blade lubrication system (Venturi)
  • Prepared for dust and chips suction unit

  • Custom made counter blocks
  • 2 x Pneumatic horizontal clamps
  • Spare Ø 550mm (21.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • MKN 300 roller conveyor - 3m (10')