MECAL SW 451

The Mecal “SW 451” is a back cut saw to cut  straight and miter PVC and aluminum profiles. The blade is activated by means of an hydro-pneumatic cylinder. The operator holds the two push buttons until the cut is completed. As soon as one or both buttons are released, the blade retract in its own casing.

  • Hydro-pneumatic blade feed
  • Infinitely adjustable saw blade feed speed
  • Two-hand controlled safe operation
  • Tilting range 45° left, 90° and 135° right
  • Possibility to set mechanical stops for intermediate angles
  • Automatic lifting of the protection cover
  • Dust and chips suction port
  • Single piece casted aluminum alloy machine base engineered for better chip/scrap evacuation

  • Motor: 2.2kW (3HP), 230V, 50Hz
  • Blade speed: 2800 RPM
  • Blade diameter: 450mm (17¾") or 500mm (19.7")
  • Blade hub diameter: 30mm (1.18")
  • Operating air pressure: 7 Bar (101 psi)
  • Ability to perform cuts at 45°, 90°, 135

  • 1 x Saw blade Ø 450mm (17¾")
  • 2 x Pneumatic horizontal clamps
  • 1 x Spray mist blade lubrication system (Venturi)
  • prepared for dust and chip suction

  • Spare Ø 450mm (17¾") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • MKN 300 roller conveyor - 3m (10')
  • 2 x Pneumatic vertical clamps
  • Custom made counter blocks