MECAL SW 451 NSB

The Mecal “SW 451” is an automatic feed back cut saw to cut straight and miter PVC and aluminum profiles. The blade is activated by means of an hydro-pneumatic cylinder.

  • Hydro-pneumatic blade feed
  • Infinitely adjustable saw blade feed speed
  • Two-hand controlled safe operation
  • Tilting range 45° left, 90° and 135° right
  • Possibility to set mechanical stops for intermediate angles
  • Automatic lifting of the protection cover
  • Dust and chips suction port
  • Single piece casted aluminum alloy machine base engineered for better chip/scrap evacuation

  • Motor: 2.2kW (3HP), 230V, 50Hz
  • Blade speed: 2800 RPM
  • Blade diameter: 450mm (17¾") or 500mm (19.7")
  • automatic feed with possibility to choose between three strokes: 300mm (11.8"), 600mm (23.6") and 1000mm (39.37")
  • Blade hub diameter: 30mm (1.18")
  • Operating air pressure: 7 Bar (101 psi)
  • Ability to perform cuts at 45°, 90°, 135

  • 1 x Saw blade Ø 450mm (17¾")
  • 2 x Pneumatic horizontal clamps
  • 1 x Spray mist blade lubrication system (Venturi)
  • prepared for dust and chip suction

  • Spare Ø 450mm (17¾") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • MKN 300 roller conveyor - 3m (10')
  • 2 x Pneumatic vertical clamps
  • Custom made counter blocks