Mecal AS 600 Up-cut Miter Saw is designed for straight and miter cutting aluminum profiles. Blade is raised up by means of a hydro-pneumatic cylinder. After the profile is clamped and hood closed, operator holds the two push buttons to raise the the blade up until the cut is completed. As soon as one or both buttons released, blade will return. Table can be rotated towards both sides for mitre angles. Safety hood is operated pneumatically. 


  • Hydro-pneumatic blade feed
  • Infinetly adjustable saw blade feed speed
  • Two-hand controlled safe operation
  • Manual rotation of the working table, up to 20° both toward right that toward left
  • Quick miter angle adjustment on preset angles: 135°, 90°, 45°
  • Manual positioning at any intermediate angle with pneumatic locking
  • Digital display to indicate miter angle, battery powered (AA)
  • Movable back-fence to increase cutting capacity at 90°
  • Pneumatically operated protection hood

  • Motor: 5kW (7HP), 400V, 60Hz (supplied with a 600-400V transformer)
  • Blade diameter: 600mm (23.6")
  • Blade hub diameter: 50mm (1.96")
  • Operating air pressure: 6-8 Bar (87-116 psi)
  • Air consumption: 16 litres/min (5 gal/min)

  • 1 x Saw blade Ø 600mm (23.6")
  • 2 x Pneumatic vertical clamp
  • 2 x Pneumatic horizontal clamp
  • Minimum Quantity Lubrication (MQL) blade cooling system
  • Chip collection tray
  • Chips extraction outlet
  • Infeed and outfeed extensions for safety hood to prevent access inside machine during operation

  • Spare Ø 600mm (23.6") saw blade
  • 20 litres (5.3 gal) pail of cutting fluid
  • MKN 300 roller conveyor - 3m (10')
  • Dust & chips collector


Mecal as 600 aluminum upcut miter saw cutting diagram